how to take apart a kitchenaid stand mixer

The KitchenAid stand mixer is an essential appliance for any kitchen, known for its durability, versatility, and superior performance. However, as with any machine, there may be times when you need to take it apart for cleaning or maintenance. In this blog post, we’ll guide you through the disassembly of your KitchenAid stand mixer step-by-step, ensuring you can effortlessly unlock the possibilities of this extraordinary kitchen companion.

Step 1: Gather the Necessary Tools
Before embarking on your disassembly journey, make sure you have the necessary tools on hand. You will need a flathead screwdriver, a small Phillips screwdriver, pliers, and a clean dry cloth.

Step 2: Unplug and Prepare the Mixer
Make sure your mixer is unplugged from the power source to prevent any accidents. Remove any accessories such as mixers or dough hooks and set them aside. Wipe the exterior of the blender with a clean cloth to remove any visible dirt or residue.

Step 3: Tilt the Stirrer Head
Most KitchenAid stand mixers come with a tilting head, making disassembly relatively easy. Gently lift the blender head to make sure it locks into the raised position. This ensures stability while you remove other components.

Step 4: Remove Accessory Hub Caps
Using a flathead screwdriver, carefully pry off the connecting hub cap located on the front of the blender. Apply light pressure under the edge of the cover and lift it up. Be careful not to damage the cover or any other surrounding parts.

Step 5: Remove Agitator Pivot Pin
Once you remove the connecting hub cap, you’ll find an agitator pin underneath it. Grip the pin firmly with the pliers and gently pull it out. This pin secures the agitator shaft; therefore, it should be removed with caution.

Step 6: Disassemble the Planetary Assembly
Now that you have removed the agitator pin, you can easily access the planetary assembly. Insert a small Phillips screwdriver into the screw in the middle of the assembly. Loosen and remove by turning counterclockwise, allowing the planetary assembly to be removed.

Step 7: Separate the Motor Housing from the Base
To separate the motor housing from the base, locate and remove the two screws on the back of the blender. These screws usually require a Phillips screwdriver. Once released, gently lift the motor housing off the base.

Step 8: Cleaning and Maintenance
With your KitchenAid stand mixer disassembled, you can now get into all nooks and crannies for a thorough cleaning. Wipe the individual components with a damp cloth and mild soap, making sure to remove any accumulated debris. Take this opportunity to check for any potential maintenance needs, such as greasing gears or replacing worn parts.

A KitchenAid stand mixer is a valuable asset to any kitchen, and knowing how to disassemble it will allow you to keep it running smoothly and in pristine condition. By following these simple steps and taking the time to maintain and clean your blender, you can ensure its longevity and reliability for all your cooking tasks. So go ahead and unleash the possibilities of your KitchenAid stand mixer with confidence!